Tandberg-data FS-1610 User Manual download pdf (Page 18)

Tandberg Data Setting Up

_____________________________________________________________

2-6 Tandberg Viking FS-1600 Series NAS Hardware User Manual

2.4. Rack Mount Installation

Before installing the FS-1600 Series NAS appliance, take the following

precautions:

• The FS-1600 Series is heavy. To minimize the chances of injuries,

make sure that two or more people help in installing the unit.

• Do not place heavy objects on the FS-1600 Series NAS appliance.

• Before installing, mark its intended position in the rack with a felt-tip

pen. Mounting the appliance so it is not level could result in

malfunctions.

• There is one pair of inner rails to be installed on the FS-1600 Series

chassis, one pair of outer rails to be installed in the rack and one

pair of short brackets to be used on the rear side of the outer rails.

• The rack mounting rails are designed to fit rack system with depth

between 30 to 33 inches (762 to 838 mm).

1. Included in the shipping package is a pair of rail assemblies. Locate

the inner and the outer rails for each rail assembly.

2. Press the locking tab to release the inner rail from it s locking

position and pull it out of the rail assembly.

Note

The inner rails are to be attached to the FS-1600 Series chassis and the outer rails

are to be installed on the rack.

Inner Rack Rails

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 52 53

No comments

Tandberg-data FS-1610 User Manual Page 18