Tandberg-data FS-1610 User Manual download pdf (Page 15)

Tandberg Data Setting Up

_____________________________________________________________

2-3 Tandberg Viking FS-1600 Series NAS Hardware User Manual

2.1.9. Sufficient Ventilation

The vents on the front panel and the fan openings on the rear panel provide

ventilation for the FS-1600 Series NAS appliance. Make sure that these

openings are not blocked and that adequate ventilation is provided where

the unit is installed.

2.2. Accessing the HDD Tray & Installing Hard

Drives

To install HDD to the FS-1600 Series NAS appliance, remove the drive tray

from the chassis in order to mount any Serial-ATA I or II HDD.

1. Press the release tab to release the drive tray from its locking

position.

2. Pull the drive tray out from the chassis by:

a. Pressing the tray handle release button.

b. Grab the tray handle and pull out the drive tray from the

chassis.

3. Remove the 2 screws at each side of the dummy tray and take out

the dummy tray as shown below:

Drive Tray

Dummy Drive

Release Button

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

No comments

Tandberg-data FS-1610 User Manual Page 15