Tandberg Data DPS Expansion Module Disk Pack Specifications download pdf (Page 27)

Unpacking and Cabling DPS Expansion Module | 21

Cabling DPS Expansion Module models XDC1200a and XDS1200a-1

The XDC1200a and XDS1200a-1 models are used with DPS1000 Series. You must connect the

controller enclosure to DPS1000 Series, cable together multiple DPS Expansion Module

enclosures, connect the DPS Expansion Module controller enclosure to the network, and

connect power cords to the enclosures.

The following graphics show the back of the controller and expansion enclosures. Use these

graphics as you cable DPS Expansion Module.

Back of XDC1200a controller enclosure

Back of XDS1200a-1 expansion enclosure

1. Power cord connectors

2. “OUT” SAS port

3. Serial port

4. Ethernet port

5. “IN” SAS port - Host 0

6. “IN” SAS port - Host 1 (not used)

1. Power cord connectors

2. Serial port (not used)

3. “OUT” SAS port

4. Port for factory use only

5. “IN” SAS port

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

No comments

Tandberg Data DPS Expansion Module Disk Pack Specifications Page 27